Sustainable resource management coupled to resilient germplasm to provide new intensive cereal–grain–legume–livestock systems in the dry savanna

Sustainable resource management is the critical agricultural research and development challenge in sub-Saharan Africa. The accumulated knowledge on soil management gathered over the last 10 years, combined with solid crop improvement and plant health research at farmers’ level, has brought us to a stage where we can now address with confidence the intensification of cereal–grain–legume-based cropping systems in the dry savanna of West Africa in a sustainable and environmentally positive manner.Two sustainable farming systems that greatly enhance the productivity and sustainability of integrated livestock systems have been developed and implemented in the dry savanna of Nigeria. These are: (i) maize (Zea mays L.)–promiscuous soybean [Glycine max (L.) Merr.] rotations that combine high nitrogen fixation and the ability to kill large numbers of Striga hermonthica seeds in the soil; and (ii) miflet [Eleusine coracana (L.) Gaerth] and dual-purpose cowpea [Vigna unguiculata (L.) Walp.]. Improvement of the cropping systems in the dry savanna has been driven by the adoption of promiscuously nodulating soybean varieties (in particular TGx 1448-2E) and dual-purpose cowpea. The rate of adoption is very high, even in the absence of an efficient seed distribution system. The number of farmers cultivating the improved varieties increased by 228% during the last 3 years. Increased production of promiscuous soybean has been stimulated by increased demand from industries and home utilization. Production in Nigeria was estimated at 405,000 t in 1999 compared to less than 60,000 t in 1984. Economic analysis of these systems shows already an increase of 50–70% in the gross incomes of adopting farmers compared to those still following the current practices, mainly continuous maize cultivation. Furthermore, increases in legume areas of 10% in Nigeria (about 30,000 ha in the northern Guinea savanna) and increases of 20% in yield have translated into additional fixed nitrogen valued annually at US$ 44 million. This reflects, at the same time, an equivalent increase in land-use productivity, and with further spread of the improved crops, there are excellent prospects for additional economic and environmental benefits from a very large recommendation domain across West Africa.     

People's Perception About Participatory Developmental Programs: Lessons from the Mountain Risk Engineering Program in the Indian Central Himalaya

The Indian Himalayan Region (IHR) is suffering from environmental degradation due to population pressure and infra-structural needs. This is coupled with a natural setting, which creates problems of accelerated soil erosion and mass wasting. In view of these environmental difficulties and the growing concern for effective restoration, there has become an urgent need for multi-disciplinary coordinated improvement schemes. The mitigation of risk arising from hazardous mass wasting processes, through a careful and systematic approach, has helped in the development of the concept of Mountain Risk Engineering (MRE). The MRE practices involve an integrated approach to solving the infra-structural engineering problems of hilly and mountainous areas through environmentally conscious cost-effective and site-specific designs. However, the role of people's participation is extremely crucial for the success of such programs. This paper analyzes the perception of the local people about the approaches adopted in MRE participatory developmental programs and throws light on the intricacies of peoples' participation.     

Hazard assessment of metals in invasive fish species of the Yamuna River,India in relation to bioaccumulation factor and exposure concentration for human health implications

Monitoring of heavy metals was conducted in the Yamuna River considering bioaccumulation factor, exposure concentration, and human health implications which showed contamination levels of copper (Cu), lead (Pb), nickel (Ni), and chromium (Cr) and their dispersion patterns along the river. Largest concentration of Pb in river water was 392 μg L^?1; Cu was 392 μg L^?1 at the extreme downstream, Allahabad and Ni was 146 μg L^?1 at midstream, Agra. Largest concentration of Cu was 617 μg kg^?1, Ni 1,621 μg kg^?1 at midstream while Pb was 1,214 μg kg^?1 at Allahabad in surface sediment. The bioconcentration of Cu, Pb, Ni, and Cr was observed where the largest accumulation of Pb was 2.29 μg kg^?1 in Oreochromis niloticus and 1.55 μg kg^?1 in Cyprinus carpio invaded at Allahabad while largest concentration of Ni was 174 μg kg^?1 in O. niloticus and 124 μg kg^?1 in C. carpio in the midstream of the river. The calculated values of hazard index (HI) for Pb was found more than one which indicated human health concern. Carcinogenic risk value for Ni was again high i.e., 17.02?×?10^?4 which was larger than all other metals studied. The results of this study indicated bioconcentration in fish due to their exposures to heavy metals from different routes which had human health risk implications. Thus, regular environmental monitoring of heavy metal contamination in fish is advocated for assessing food safety since health risk may be associated with the consumption of fish contaminated through exposure to a degraded environment.     

Molasses-based growth and lipid production by Chlorella pyrenoidosa: A potential feedstock for biodiesel

Biodiesel provides a feasible solution to the twin crisis of energy security and environmental concerns prevalent today, and it can be extracted from conventional oil crops as well as microalgae. However, lipid productivity in case of microalgae is much higher and has several advantages as compared with crop plants, so it is a better feedstock for biodiesel. In case of Chlorella pyrenoidosa, the heterotrophic cultured cells were found to be better in terms of lipid production, and ultimately biodiesel production, but the bottleneck is that in this mode glucose is used to feed the cells, which amounts to almost 80% of the total cost of biodiesel production. The purpose of this study is to evaluate and highlight the feasibility of using the industrially cheap cane molasses as a carbon source in place of glucose for a large-scale, low-cost lipid production of Chlorella pyrenoidosa. When treated molasses was used as a carbon source instead of glucose, the biomass sharply increases from 0.89 to 1.22 g L^–1. On the other hand, the total lipid content increases from 0.27 to 0.66 g g^–1. The specific growth rate and yield was higher in treated molasses as compared with that in glucose-supplemented. A mathematical model was also developed based on logistic, Luedeking–Piret, and Luedeking-Piret-like equations. Model predictions were in satisfactory agreement with the measured data, and the mode of lipid production was growth-associated.     

Effect of pressure and temperature on the hydropyrolysis of cotton residue

With growing concerns of fossil fuel resources availability and the volatility of crude oil price, it is becoming imperative day by day to utilize the renewable sources of energy in a sustainable, environment friendly and energy efficient manner. India is the world’s second largest producer of cotton after China. India also has several agricultural and forest residues, and cotton residue is one of the most abundant agricultural residues after rice and wheat residues. The hydropyrolysis of cotton residues has been carried out at various pressures (1, 20 and 40 bar) and temperatures (300, 350, 400 and 450 °C). The effects of temperature and pressure have been studied to understand their yield patterns, and it has been observed that 20 bar pressure and 400 °C are the optimum conditions. The thermogravimetric analysis shows that cotton residue has two significant decomposition temperatures. The SEM, XRD patterns and FT-IR spectra clearly indicate the decomposition of the macromolecular structure of the cotton residue and formation of low molecular weight hydrocarbons suitable for various applications.     

Assessment of imidacloprid degradation by soil-isolated Bacillus alkalinitrilicus

Imidacloprid is extensively used on a broad range of crops worldwide as seed dressing, soil treatment, and foliar application. Hence, the degradation potential of bacterial strains from sugarcane-growing soils was studied in liquid medium for subsequent use in bioremediation of contaminated soils. The microbe cultures degrading imidacloprid were isolated and enriched on Dorn’s broth containing imidacloprid as sole carbon source maintained at 28 °C and Bacillus alkalinitrilicus showed maximum potential to degrade imidacloprid. Clay loam soil samples were fortified with imidacloprid at 50, 100, and 150 mg kg^?1 along with 45?×?10⁷ microbe cells under two opposing sets of conditions, viz., autoclaved and unautoclaved. To study degradation and metabolism of imidacloprid under these two conditions, samples were drawn at regular intervals of 7, 14, 28, 35, 42, 49, and 56 days. Among metabolites, three metabolites were detected, viz., 6-chloronicotinic acid, nitrosimine followed by imidacloprid-NTG under both the conditions. Total imidacloprid residues were not found to follow the first-order kinetics in both types of conditions. This paper reports for the first time the potential use of pure cultures of soil-isolated native bacterium B. alkalinitrilicus and also its use along with natural soil microflora for remediation of imidacloprid-contaminated soils.     

Persistence of chlorantraniliprole granule formulation in sugarcane field soil

Chlorantraniliprole, an anthranilic diamide insecticide with novel mode of action, is found effective against several lepidopteran as well as coleopteran, dipteran, and hemipteran pests. The present studies were carried out to study the persistence pattern of chlorantraniliprole on sugarcane field soil following application of granule formulation. The residues of chlorantraniliprole were estimated using high performance liquid chromatograph (HPLC) and confirmed by liquid chromatograph-mass spectrometry (LC-MS/MS). Following application of chlorantraniliprole (Ferterra 0.4G) at 100 and 200 g a.i. ha^?1, the average initial deposits of chlorantraniliprole were observed to be 0.88 and 1.59 mg kg^?1, respectively. These residues dissipated below the limit of quantification (LOQ) of 0.01 mg kg^?1 after 56 days of the application of insecticides at both the dosages. The half-life values (t _1/2) of chlorantraniliprole were worked out to be 8.36 and 8.25 days, at recommended and double the recommended dosages, respectively.